Your Cart is empty
NEXT
PREV
Sale
Batya + Spooky Coord -- Hard Enamel Pin Set -- Dress Up Pin Dolls Collection
$32.00
$28.00
About the Pin:
Batya is 2.4" tall and has 2 posts. Includes her signature dress up set: Black kuro lolita dress (with witchy vibes. approx 1.25" tall with 2 extended posts) and a witch's hat that can be worn multiple ways (approx .8" tall with 1 extended post).
Pantone-spec Hard enamel.
*Backing card design subject to change*
Note regarding grade: Standard grade pins will follow the grading guide (linked below). Seconds grade pin sets may have defects on as few as 1 or as many as all 3 parts.
About the Collection:
The Dress up dolls pin collection is, as of this writing (Oct 2021), a planned series of cross-compatible dress up doll pins. Batya is the first installment of the series and will be forward compatible with upcoming designs.
How to Use:
This pin comes as a set, and is sold only as a complete set (base animal + clothing).
To assemble: align the top pins (hat and dress) over top of the base pin (in this case, Batya herself). Press into a backing material where the pin is to be displayed (on a board, on clothes, on an ita bag insert, etc).
Please note: this pin requires a backing material to stay in place and assemble properly. The pieces are held in place via the posts.
Tee Shirts - FLAT DIMENSIONS
| (in inches) | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| SLEEVE LENGTH | 15 ⅝ | 17 | 18 ½ | 20 | 21 ½ | 22 ⅞ |
| FULL BODY LENGTH | 28 | 29 | 30 | 31 | 32 | 33 |
| BODY WIDTH | 18 | 20 | 22 | 24 | 26 | 28 |
| BODY LENGTH | 28 | 29 | 30 | 31 | 32 | 33 |
Tank Tops - FLAT DIMENSIONS
| (in inches) | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|
| Width | 16 ¼ | 18 ¼ | 20 ¼ | 22 ¼ | 24 ¼ | 26 ¼ |
| Full Body Length | 26 | 27 | 28 | 29 | 30 | 31 |
| Length | 26 | 27 | 28 | 29 | 30 | 31 |
Sweaters - FLAT DIMENSIONS
| (in inches) | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| SLEEVE LENGTH | 33 | 34 | 35 | 36 | 37 | 38 |
| FULL BODY LENGTH | 26 | 27 | 28 | 29 | 30 | 31 |
| BODY WIDTH | 20 | 22 | 24 | 26 | 28 | 30 |
Hoodies - FLAT DIMENSIONS
| (in inches) | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| SLEEVE LENGTH | 33 | 34 | 35 | 36 | 37 | 38 |
| FULL BODY LENGTH | 26 | 27 | 28 | 29 | 30 | 31 |
| BODY WIDTH | 20 | 22 | 24 | 26 | 28 | 30 |
| BODY LENGTH | 26 | 27 | 28 | 29 | 30 | 31 |
Skirts
| S | M | L | XL | 2XL | |
|---|---|---|---|---|---|
| Waist | 26"-27" | 28"-29" | 30"-31" | 32"-34" | 35"-38" |
| Hips | 35"-36" | 37"-38" | 39"-41" | 42"-45" | 46"-48" |
Leggings
| S | M | L | XL | 2XL | |
|---|---|---|---|---|---|
| Waist | 26"-27" | 28"-29" | 30"-31" | 32"-34" | 35"-38" |
| Hips | 35"-36" | 37"-38" | 39"-41" | 42"-45" | 46"-48" |
| Thigh | 22"-23" | 24"-25" | 26"-27" | 28"-29" | 30"-31" |
| Ankle | 8.5" | 9" | 9.5" | 10" | 10.5" |
Hats
Head circumference ~ 23"
Enamel Pin Grading
Collector's/Perfect Grade:
This grade IS NOT offered currently. Sorry!
Standard Grade:
This is the highest possible quality of pin offered. Standard-grade pins may still be susceptible to very minor imperfections that are only visible upon extremely close-up inspection and/or when the light hits the pin at a specific angle. As a general rule, if the lay person would hardly notice an imperfection, it's standard grade.
By purchasing this grade, you have read this and understand that these minor imperfections are acceptable and will NOT be grounds for a return, refund, partial refund, nor replacement.
Examples of potential Standard Grade imperfections:
- Imperfections in tone, texture, or finish in either the enamel OR metal only visible at specific light angle(s).
- Minor surface scuffs on metal/enamel
- Small ripples/pores or bubbles in enamel that may be exacerbated by viewing angle
- Slightly lower fills in minor areas
- Wrong color fills in small/minor areas
- Tiny specks in enamel <1mm
- Marks in minor areas (e.g. right on the edge of a fill where visually minor)
- Slight rippling or variance in surface texture
- Non-gloss surface finish
Seconds Grade:
These are the pieces that have more noticeable defects. As a general rule, if a defect visible very easily at a distance, it is seconds grade.
Examples of potential Seconds Grade imperfections:
- Imperfections in tone, texture, or finish in either the enamel OR metal
- Major surface scuffs on metal/enamel
- Poor coloration or mismatching colors of enamel
- Wrong color fill in major areas
- Noticable ripples/pores or bubbles in enamel
- Dust, markings, debris in enamel
- Apparent mechanical damage
- Lower fills in certain areas
- Specks in enamel >1mm
- Rippling or variance in surface texture
- Missing or loose pin posts
Examples of Seconds Grade Pins
 |
 |
 |
| Examples showing some defects - poor plating, dripped/overrun enamel | Examples of potential coloration issues -- these tend to be present only in certain specific batches. if you're unsure, send us a message. | Examples of common defects - scratches, pores, specks, and punctures. |
Ita Bag Grading
Collector's/Perfect Grade:
This grade IS NOT offered currently. Sorry!
Standard Grade:
This is the highest possible quality of ita bag offered. Standard-grade bags may still be susceptible to very minor imperfections that are only visible upon close-up inspection and do not impact the functionality of the bag. As a general rule, if the lay person would hardly notice an imperfection, it's standard grade.
By purchasing this grade, you have read this and understand that these minor imperfections are acceptable and will NOT be grounds for a return, refund, partial refund, nor replacement.
Examples of potential Standard Grade imperfections:
- Minor deformation or warping of bag panels and overall shape
- Dents that are minor on the bottom/back of bag (less conspicuous places) -- these can often be rubbed our or removed
- Minor scratches, scuffs, wrinkling, or creases on bag exterior surface
- Small loose threads
- Discoloration in minor areas
- Small Specks/flecks that may or may not be able to be removed
- Squeaky/catchy hardware (may be resolved with silicone lubricant)
- missing back stamp
- slight smudged/scratched print
- Flawed inserts where, once inserted into the bag, are hidden
- Insert flaws that can be hidden by placing a pin
- Wrinkled inserts
Seconds Grade:
These are the pieces that have more noticeable defects. As a general rule, if a defect visible very easily at a distance or impacts use, it is seconds grade.
Examples of potential Seconds Grade imperfections:
- Highly visible flaws on bag exterior
- large scratches or marks visible at all angles
- Damaged or torn material at edges or panels
- Poorly functioning hardware
- Missing Accessories/Pieces
- unraveling stitching
- Major warping or bending to parts
- Misaligned parts
- Inserts with poor screen print (misaligned, chipping)
- Inserts with large flaws that cannot be hidden by placing pins or placing into ita bag window
